Thursday, November 19, 2026

Modeling the GREAT REPUBLIC

Completing the consist

As mentioned in the last post, heavyweight parlor cars are the one missing type of rolling stock needed to complete model passenger train consists on the layout.

The heavyweight parlor cars GREAT REPUBLIC and AUBURN were assigned to the Berkshire Line of the New Haven Railroad during 1957. 

Both cars were equipped with Electro-mechanical air-conditioning that would not require icing en route where none may be available during the warmer months on the Berkshire Line during that era. See excerpt from the 1957 passenger train consist list below. 

Although no photographic evidence has surfaced to date of either car on the Berkshire Line, the GREAT REPUBLIC was the one parlor car most mentioned by those who witnessed that era first hand will be the car modeled first.

Choosing a base modeling core 

There are no accurate era correct RTR models of the specific heavyweight Pullman prototypes that were assigned to the Berkshire Line during the era of the layout. Starting with a Pullman kit for use as a base modeling core combined with aftermarket styrene, resin or brass parts will help facilitate a conversion to an accurate parlor car.

A Branchline Trains Pullman sleeper kit will be used for a base modeling core, this choice remains consistent with other Pullman cars already built for the layout.

Unfortunately, kits and some parts used during this build are no longer available from the original manufacturer but may still be found elsewhere.

Car sides   

There are some interesting challenges in converting the Branchline Trains sleeper core to an accurate model of the GREAT REPUBLIC, Pullman Plan #4001.

The first step will be correcting the layout of the windows on both car sides to a Plan #4001 arrangement.

A floor plan for Pullman Plan #4001 is available on the internet from the Pullman Digital Collection at the Newberry Library, this is an invaluable source for the correct spacing and dimensions of the windows and overall layout of the interior.

A similar method used to replace the windows when building the DUDLEY is used again for the GREAT REPUBLIC.

Both car sides from the core Branchline Trains Pullman kit had the complete window area removed leaving only the top and bottom portions of the sides behind. The vestibule doors were also removed from the sides although shown taped in place for the photo below.

Above, one side of the Plan #4001 replacement window arrangement with the appropriate sized styrene windows from New England Rail Service and styrene filler panels referring to the floor plan from the Newberry Library as a guide.

A temporary jig for gluing the widows to the car sides is formed with styrene pieces glued to the top and bottom of opposite sides of an aluminum block this adding up to a total measurement exactly equal to the inside width between the kits car sides when snapped into place. The larger stack of styrene pieces in the middle of the block will provide a work surface to inset the replacement windows and panels to a consistent depth while gluing them in place.

Sliding this temporary jig along the floor from window to window while gluing the windows and filler panels in place below. 

A bottle of Tamiya extra thin cement with brush applicator worked very well for this procedure. 

A completed pair of Plan #4001 sides below.


Roof

The roof is the most interesting challenge during this conversion. 

The GREAT REPUBLIC has a wide clerestory roof making it necessary to replace both the narrow clerestory roof and matching pedimented car ends from the core Branchline Trains kit. A cast resin wide clerestory roof void of any venting detail on both sides of the clerestory and matching resin pedimented car ends from Tom Madden will replace the Branchline Trains parts.

The most difficult challenge and the one that held back the build of this car for considerable time is the exterior roof air conditioning duct. This duct is the type that rises vertically approximately 12" from the car side before curving to meet the top of the clerestory; if there is a proper nomenclature for this type of duct it is unknown to me. A cropped photo of a converted NH parlor to coach below is the best example on hand to illustrate this type of A/C duct.


There is no known HO scale aftermarket part for this type of duct. Scratch building one over a curved A/C duct using the test method below was considered, but the project stalled here.


A gifted resin roof for possible use with this build that had the correct type of ducts on both sides of the clerestory was the motivation to restart this stalled project.

Neither of these ducts from the donor roof were long enough to replicate the length of the one side only duct on the GREAT REPUBLIC. This turned out to be a positive by being able to cut out both ducts from the donor roof, adjust the overall length of the donor duct by splicing partial segments of these ducts together to the correct overall length needed for the GREAT REPUBLIC.

The photo below shows the wide clerestory resin roof to be used with a cut out to receive the donor duct with the two duct parts now spliced together.


These resin pieces need to be glued together with an ACC type adhesive. The issue with ACC is the quick drying time and the one shot to get it correct over the long length of the duct, and not wanting to mar the outside to be seen top surface.

The solution was to ACC .005" styrene pieces to the underside joining the duct to the roof, starting on one end then the opposite end, then the center, following outward from center. This worked well with good tight joints with no glue maring the exterior seen surface.


Test fit

This photo shows all that remains of the Branchline Trains base plate/chassis.

The car ends have been removed for the replacement wide clerestory resin car ends to be glued in place with ACC.

The white styrene pads glued to all four vertical uprights make up for the difference in thickness between the Branchline car sides and the thinner replacement windows, this offers a consistent surface bottom to top when gluing on the sides during final assembly.

The notch cut into the far upright is to clear the saloon window that is very close to the interior vestibule wall, the same notch is on the opposite end for the other saloon.

The floor will be covered first with the steel weight supplied with the kit then a styrene floor to mount the interior details. 


Temporally assembling the sides, roof, car ends and doors for a test fit, looks like all will fit together well.

To finish this assembly for painting, the visible end joints of the ducts will be smoothed with a lightweight catalyzed automotive filler, rivet decals below the window belt rail to match the window rivet pattern above and clerestory vents and fans to match the prototype will be applied. 


Paint

Once the needed Archer rivet decals were applied, the car sides, vestibule doors and car ends were painted Badger Model Flex New Haven Pullman green #16-180, this color is a good match with the factory applied Pullman green on Rapido Osgood-Bradley "American Flyer" coaches already on the layout offering a good color consistency amongst the passenger car roster.

The painted pair of sides with Bethlehem Car Works decals,


and the with the roof painted black.


Seating

The rotating parlor car seats are from a donor Walthers parlor car. Not knowing what color they were in 1957, the same dark blue used on other NH passenger cars on the layout roster was applied. The antimacassars are small pieces of white decal applied over the top of the chair backs.


The 34 parlor car seats mounted on the car floor, arraigned in a similar pattern as the drawing from the Newberry Library. The one smaller chair to the right is the Porter's chair.

All the walls/partitions, some from the Walthers car and some scratch built, were added later but unfortunately no photo taken.


Finished car GREAT REPUBLIC 

The details to finish the car ends, vestibule steps, hand grabs and trucks all are from the Branchline Trains core kit.
 


The roof clerestory vents and fans all are Tom Madden resin castings.

All underbody equipment is an assortment of details from the Branchline Trains core kit, New England Rail Service, Tom Madden resin castings, Walthers, Cal Scale, or scratch built; all equipment is located on the underbody as best as could be determined from prototype photos.

Finally a heavyweight parlor car for the Berkshire Line layout! 


The elegant prototype parlor car GREAT REPUBLIC is still in service to this day at The Valley Railroad in Essex Connecticut, see and ride in it if you can! 

Sunday, August 2, 2026

The GREAT REPUBLIC

A brief profile of the Yankee Clipper

The Yankee Clipper was a luxury extra fare all parlor car train limited to 175 passengers each assigned to a 1st class seat serving well-to-do travelers between Boston and New York City via the New Haven Railroad Shoreline Route.

The Yankee Clipper named for the great sailing ships of the 19th century known for their speed, quality construction and fine naval architectural lines. 

Inaugurated into service on the March 18th 1930 and publicized as the "Flagship" of the Shore Line Fleet. Like the swift seaborne commerce of the clipper ships, this train was also known for its speed. Scheduled to complete the distance between terminals in 4 3/4 hours made possible by priority dispatching enroute and only stopping at Providence R.I. and New Haven CT.

A comprehensive history of the Yankee Clipper can be found in the NHRHTA magazine Shoreliner, Vol 37 Issue 2, still available as of this writing thru the NHRHTA store at a modest price, a great article well worth the read!


Additionally, there is an earlier article about the Yankee Clipper in the Shoreliner, Vol 11 Issue 4. Possibly, this 1980 issue could be found on the used market, also a great article. 

Consist of the Yankee Clipper

Built entirely by Pullman Standard, all Yankee Clipper parlor cars and a pair of "Deluxe" dining cars limited to just 36 seats, offered the latest in design, equipment, finest passenger comfort and onboard service. 

Initially assembled as a pair of identical seven car consists to travel simultaneously in opposite directions on the New Haven Shore Line Route between their respective terminals, Boston South Street Station and Grand Central Terminal in New York City.

All cars built for the Yankee Clipper were named for a noted 19th century clipper ships and displayed a ship's name on both sides of that car.

The seven car consists of the initial Yankee Clipper train numbers #22 & #23 from the New Haven Passenger Consists List below.

The 34 chair parlor cars of the Yankee Clipper

Note the four 34 chair parlor cars marshalled with a dining car in-between in the consists above.

These 34 chair parlor cars were built to Pullman Plan 4001. The four cars were named for the respective clipper ships, SOVEREIGN OF THE SEAS, GREAT REPUBLIC, JAMES BAINES and DONALD McKAY.

Possibly as a result of the 1930's economy, starting as soon as 1932 these four 34 chair cars were no longer regularly in the consist of the Yankee Clipper as the train sets were down to a five car consist as below.

These 34 chair plan 4001 cars returned to the Yankee Clipper briefly during 1934 although only in the consist Mondays and Fridays. Beyond 1934, all four cars were listed as "spares" in the consist lists until the end of World War 2.

Post war, all four of these 34 chair cars were re-assigned thru 1948 to the paired consists of the elegant extra fare Merchants Limited that served business passengers offering first class only seating on trains #26 & #27 that also ran simultaneously in opposite directions between Boston and New York City.


The GREAT REPUBLIC at Boston in a consist of the Merchants Limited 1947, below.


With the arrival of New Haven's all new post war stainless steel clad passenger car fleet in 1949, the four 34 chair parlor cars, SOVEREIGN OF THE SEAS, GREAT REPUBLIC, JAMES BAINES and DONALD McKAY, originally built for the 1930 Yankee Clipper once again returned to being listed as "spares" in the railroads consists lists with the exception of some being assigned in the mid 1950's to summer only seasonal trains between New York and Cape Cod.

SOVEREIGN OF THE SEAS consisted in seasonal Cape Cod train #104 or #107-108 at Hyannis, below.


The Parlor Car GREAT REPUBLIC

Singling out the parlor car GREAT REPUBLIC here has a connection to the passenger train operations on the Berkshire Line during the era of the layout.

The GREAT REPUBLIC was listed in the 1957 consist of weekend trains #144 - #147

This heavyweight parlor car has long been the one missing car during passenger train operations on the layout. Time to build a model the GREAT REPUBLIC!

Named for a clipper ship

Parlor car GREAT REPUBLIC was named for the clipper ship GREAT REPUBLIC, when launched 1853 it was the largest wooden ship in the world. There is much information to be found about the clipper GREAT REPUBLIC by searching the internet and in the Shoreliner Magazine Vol 11 Issue #4

Saved from the scrappers!

Jim Bradley of Stonington, Connecticut, purchased six heavyweight Pullman cars that had been withdrawn from service by the New Haven railroad during 1961-62 and had them moved to his property in Stonington that overlooked the New Haven Shore Line Route. Fortunately, the GREAT REPUBLIC was one of the cars he saved from scrapping.

Jim Bradley passed away in 1988, thanks to his preservation efforts his collection of Pullman cars were all saved, one to a private owner, four to the Railroad Museum of New England and the Great REPUBLIC to the Valley Railroad where it continues to serve on the Essex Steam Train.

During a visit to Essex about a decade ago, this photo below.


  Next, a start on building a model of the GREAT REPUBLIC for the layout.........

Thursday, June 11, 2026

Modeling State Line Interchange Yard - Finale

The state border line between MASS & NY

New Haven Railroad State Line interchange yard was located entirely in Massachusetts, at the western end of the yard is the border line between the states of Massachusetts and New York.                              

The New Haven Railroad property ended a just short of the state border line but it's interchange track continued across the border connecting with the Boston & Albany interchange yard located in New York state immediately across the state line.

Border Line Marker

There was no border line marker on the New Haven Railroad but the closely paralleling Boston & Albany Railroad marked the transition between the states with a concrete border line monument with the lettering MASS on one side and NY on the opposite side

A portion of Jim Dufour’s prototypically modeled and highly detailed HO scale Boston & Maine Cheshire Branch layout includes the State Line location on that branch. 

Jim, knowing that I also model a "State Line" had taken the eastern faceing photo below of the state line monument while railfanning at the site of the B&A state line and kindly sent it to me.

I hadn't thought about including this monument until seeing Jim's photo but realized it would be a nice final detail at the western end of the State Line scene on the layout where the interchange track disappears into staging.

A year ago while railfanning the northern portion Berkshire Line I was able to take a photo of the western facing side of the monument that has the letters "NY".

The photo was sized then cut out and mounted to a scale styrene monument and placed next to the B&A track, below.

The track in the foreground is the NH lead to the B&A interchange yard (to staging on the layout). The B&A main in the rear had 3 tracks at this location in 1957, on the layout this scene is only 12" deep, no room for 3 so a single track will have to do.

This completes the State Line interchange yard portion of the layout!

Thank You

Modeling State Line to any degree of accuracy would have been very difficult without the help offered from George Ford, for the photos, his remembrances of the time spent there when his dad was the station agent and all that he so very kindly shared with me.

Thank You!  


Thursday, April 30, 2026

Modeling State Line Interchange Yard & Rising Junction part 18 - Structures

What was, wasn't, but is anyway

What was

These simple railroad structures built during 1896 that were once located at New Haven State Line interchange yard have long appealed to me since first seeing the above photo 47 years ago in the NHRHTA Shoreliner magazine article, THE BERKSHIRE LINE, authored by the late Tom Curtin.


 What wasn't

According to the document below the more substantial freight office/bunk house was removed during 1939 and assuming the other structures were at the same time. 

Gone 18 years before 1957 and wasn't there during the era of the layout.


What is anyway

Moving forward to the 1957 era of the layout, these structures are modeled and placed on the layout anyway because of my personal attraction to them!

These simple quick build models were assembled using readily available Evergreen styrene shapes and siding, Tichy windows and doors.


Although not prototypically correct, the structures now have an extend life forward into 1957 on the layout.



Thursday, April 2, 2026

Modeling State Line Interchange Yard & Rising Junction part 17 - Structures

Finishing the Boston & Albany station

Colors and some signature details

The station colors appear to be a light gray with darker gray trim in the 1952 Thomas J. McNamara photo posted before and below. The second photo below is the restored B&A Chester MA. station about 40 miles to the east of State Line, it displays a fresh but similar gray color scheme, window trim and end rafter/truss support.

Some of the signature details seen in the photos to be added to the model are the exterior rafter/truss supports at the roof ends, decorative trim over windows and doors, roof snow guard, plumbing vent on roof and center draining rain gutter and downspout that is not visible in this photo.



Assembly

The decorative trim over the tops of the windows and doors has been added and door height increased below.


The 3 sides visible when on layout are painted in the gray scheme with windows and doors installed ready for assembly.


With the sides and partial roof assembled, a final test fit onto the foundation placed into the scene during part 15. 

Some basic weathering was applied to the sides before assembly. The vertical scrap piece styrene glued on top of the interior walls will support the ridge beam from sagging on the finished model.


The second side of the roof now in place, a test fit of the roof snow guard made with phosphor bronze wire.


The non prototypical eave and gable braces have been attach in this photo. All remaining roof trim and details were then attached, but no photos taken during that part of the assembly.


Station in place on the layout

The finished station in place on the layout.

Prototypical signature roof details, snow guard, center drain gutter with downspout show in this photo.

Seeing station agent George Ford's black Plymouth sedan at the station indicates he is on the job today!


The west side.


And east side.


 

Wednesday, March 4, 2026

Modeling State Line Interchange Yard & Rising Junction part 16 - Structures

Boston & Albany Railroad station building at the State Line Massachusetts interchange yard

Searching for historical and dimensional information that would be useful in building a model of the Boston & Albany station structure that once stood at the State Line interchange yard located in the town of West Stockbridge Massachusetts has not been productive. Honestly, if more time had been devoted to an in depth search maybe there is dimensional information somewhere but it is time to move on. 

A quick internet search of railroad and local historical societies provided only one article in the Berkshire Edge that has some photos of the West Stockbridge station and two photos of the State Line station, these two photos like several others discovered focus on the B&A side of the station and offer limited use for modeling the New Haven side of the structure that will be visible when installed on the layout.

The below photo of the New Haven Railroad side of the station by an unknown photographer and era is the most useful for overall modeling from a photo to date.


This Thomas J McNamara photo from the NHRHTA collection taken during a 1952 New Haven fan trip to State Line. Although mostly blocked by the RDC it offers colors, window trim and building condition closer to the era of the layout.

   
An interesting detail about this station are the very ornate Eave and Gable braces circled in the photo below. Most likely 3D printing would be the practical way to reproduce these in HO scale. Unfortunately, I do not have the design skills to create the necessary drawings for these to be printed.


The Model

The best outcome to be hoped for will be a model that is a reasonable representation of the station building working from limited photos for proportional dimensions and using readily available windows, doors and braces.

A basic full size HO pencil drawing helps deciding on proportions and roof pitch that look reasonable when comparing with photos of the prototype, layout of windows, doors and size of the foundation (already installed on the layout).

Below the clapboard sides placed over the drawing with Tichy windows and doors temporarily placed in the cutouts with Grandt Line eave brace that will be used in place of the ornate prototype braces. The doors will have to be lengthened and trim pieces added to window and door perimeters as prototype.


This build is straightforward and should go quickly.

Friday, January 30, 2026

Modeling State Line Interchange Yard & Rising Junction part 15 - Structures

Bridge #10.33 

The State Line bridge numbering indicates that it was located 10.33 miles west from the junction point with the Berkshire main at Rising Junction.


Reference photos for modeling State Line bridge #10.33 over Flat Brook are scarce. The only photo reference of the bridge decking available to me is a photo I took of a TV screen during a paused VCR tape. This VCR tape was purchased many years ago, its title unknown now and not even sure that it is still my collection plus the means to play it no longer available. I believe this recording was taken during a fan trip to State Line, possibly late 40's early 50's. Some good reference here for modeling the station building too. Glad I had the foresight to take this paused screen photo, although blurry, and save so long ago! 

The main issue with modeling the bridge deck is the switch stand located on the bridge itself and the switch points possibly being on the bridge also. Because the switch on the layout is powered by an underneath switch motor there was no practical way to make that work and the switch was moved the minimal distance from the bridge and switch stand not modeled.

The deck is modeled with Evergreen styrene, instead of individual styrene strips to model the deck planking V-Groove siding sheet was used to ease construction. The railing is various sizes of styrene strips.   

The finished bridge permanently in place, painted and ballasted

I decided during installing the bridge to also complete the scenery and trees to the west end of the State Line diorama in preparation of modeling the B&A station building.

While completing the fore mentioned scenery a "foundation" for the station building and parking lot were installed at the same time.

Modeling the station building next project.